Square Stainless Steel Hip Flask with Silicone Loop (GL-FNC Series)

Product features

• A square body with rounded edges: The body is a long cuboid with all four edges rounded off, so it sits flat in a pocket and there is no square corner to catch on the way in or out.
• Spout to one side, not centred: The neck is set toward one end of the top plate rather than in the middle, which gives the flask a front and a back instead of a symmetrical top.
• Silicone loop through the cap: A silicone loop is fitted to the stainless steel cap, so the flask hangs from a finger, a hook or a bag strap and is carried without a pouch.
• Spray painted to your colour: The body is spray painted and the colour is set from the brand's own reference rather than a fixed range, so the flask matches the label and the box.
• Logo on the flat face: Artwork is laid on the flat panel of the body by silk screen, laser or 3D printing, with the rounded corners and the shoulder left clear of print.

Customizing options

• Paint colour: The body is spray painted to the colour you name, matched against a brand reference, a colour chip or a physical sample, so the flask, the box and the label can sit in the same colour.
• Logo method: Silk screen, laser or 3D printing, chosen with the artwork: a screen for solid colours, a laser for a fine mark, 3D printing for a multi-colour design on the same face.
• Logo area: The mark goes inside the flat face of the body; the rounded corners and the shoulder stay clear, so a design that has to wrap all the way round cannot be laid on this flask.
• Packaging: White box, kraft paper box or colour box, customized to the order.
• Capacity: This model is listed at 8OZ, 7.6 x 3.3 x 15.9cm at 168g, item number GL-FNC01, packed 100 pcs to a carton.

Inquiry now